Fundamental Woodworking Shop Tools – The Band Saw
The band saw is called such because the “blade” is truly a band that is held in place by pulleys and moves around in a circular motion. It’s a fantastic cutting machine which allows you to cut curves and curved shapes. Get more information about best woodworking bandsaw
One thing to be careful of:
The band saw is not just for wood. It may used to cut other stuff, glass and metals. The thing you should understand is what type of band (blade) to use. Since we’re talking about woodworking shop tools, a standard tooth blade is for cutting wood the most common. You will find others including the skip tooth blade that is used for cutting tougher pieces of wood for cutting on softer woods and the aquiline tooth blade. The blades also come in different sizes, real thin and flexible for your cuts that are curved and rounded, thicker wider blades for your straight cuts.
A few safety tips for using your woodworking shop tool-the band saw:
-Always do your maintenance and inspections that you just read in your manufactures manual.
-Make sure the tool is unplugged before starting any of your maintenance.
-Tighten the blade according to your own owner’s manual.
-Makes certain the blade is in its proper path.
-When stopping up the band saw in, always check to be sure it truly is in the “off” place.
-Never leave the band saw on unattended.
-Never reach across the blades.
– wear your eye protection!
A few tips while using your woodworking shop tool – the band saw:
There’s a blade guard that you should fix no higher than about 1/4 inch above the wood surface. Allow it to get to full speed before you start your cutting, when you first turn on the saw. Be sure the wood stays firmly on the surface, as you begin to cut. Use a push stick for extremely thin cuts that you just may keep your fingers at least 3-4 inches away for the blade. There’ll be times while cutting curves so take it simple and slow that you will put pressure on the blades. Should you should back out of the cut to alleviate the tension, turn the saw off and wait until it completely ceases, then back your wood out. Keep your working area clean and nicely lit, always remain your thoughts on the job available and concentrated. Do not let others distract you.